Tube Axial Fans
Self Exhaust Counter
Fresh Air Grill
A kitchen hood, exhaust hood, or range hood is a device containing a Grease Filter that hangs above the Stove, Gas Range, Tandoor or Cooktop in a commercial kitchen. It removes airborne grease, combustion products, fumes, smoke, heat, and steam from the air by evacuation of the air and filtration. Commercial vent hoods may also be combined with a fresh air fan that draws in exterior air, circulating it with the cooking fumes, which is then drawn out by the hood. A filtration system in an exhaust hoods helps in removing grease and other particles.
The different types of exhaust hoods manufactured by us are: Wall Type Exhaust Hood, Box Type Exhaust Hood, Angular Exhaust Hood. All the exhaust hoods are fabricated from Stainless Steel 304, Stainless Steel 202, Aluminium, Galvanize, Quality sheet containing oil Gutter system for removing oil, Grease filter Arrangement, Lights. Hoods may also be combined with a fresh air fan that draws in exterior air, circulating it with the cooking fumes, which is then drawn out by the hood.
A centrifugal blower is a mechanical device for moving air or other gases. It uses the Kinetic Energy of the impellors to increase the volume of the air stream, which in turn moves them against the resistance caused by ducts, dampers and other components. It displaces air radially, changing the direction (typically by 90°) of the airflow.
We specially design and manufacture industrial impellers and blowers for Kitchen Exhaust and Fresh Air System to move airstreams and gas streams of all types including clean, dirty, hot, and cold air. Our industrial impeller and industrial blowers include both pre-engineered and custom designs, including: backward inclined fans, backward curved impeller, medium pressure blower, low pressure impeller, and other centrifugal blowers. We offer high range quality industrial fans and blowers with premier customer service. Our products are manufactured with high resistant construction.
Centrifugal Fans are available in 2 types: Single Inlet Single Width (SISW) and Double Inlet Double Width (DIDW). These fans have been designed as most efficient fans suitable for ventilation system.
Tube Axial Fans
Tube Axial Fans are specially designed to meet the extracting demands of commercial and industrial ventilation in hot, humid, dusty and corrosive environments. These fans cover wide range of air quantities and pressures. The impeller is mounted on the motor shaft in the casing or on an extended shaft for V-belt drive. Tube Axial fan models are applied to a wide range of supply or exhaust applications in commercial and industrial environments. A Tube Axial fan is best defined as a fan that is mounted inline that is used for extraction purposes.
The baffle is the flow control panel. Baffle Filters are made of multiple stainless steel curved panels through which air moves and during this process, the panel retains oil, grease particles present in the air. Baffle Filter or commonly also called as Grease Filter is fabricated from Stainless Steel 304, Stainless Steel 202, Aluminium, Galvanize and supreme quality sheets with hinges for better cleaning purpose.
Electrostatic air cleaner ideal for the removal of grease and smoke from commercial cooking application. It uses electrostatic precipitator (ESP) technology to remove grease and smoke from cooking processes for cleaner air. So there is no need for costly filter replacement, just routine service cleaning required.ADVANTAGES
- 1. It is efficient in collecting particulates as small as 0.01pm.
- 2. The Collection cell is not consumable and is easy for maintenance. Hence, this reduces your operation cost.
- 3. Ionizing area consists of sparked tooth which is highly efficient & stable.
- 4. Solid state power supply is self-regulatory and maintains peak efficiency during a wide range of cell dirt-loading conditions.
- 5. Prefilter screens protect collection cells form large particles.
- 1. Polluted air is exhausted into the electrostatic filter by the fan.
- 2. The pre-filter retains the large particles.
- 3. The particles in the airflow are charged P/N by the ionizing section (1st stage).
- 4. The charged particles are attached to the collection plates connected to the ground (2nd stage).
- 5. Clean air comes out
As the name suggests Kitchen Scrubber is a device which is used in a kitchen to scrub the fumes generated from the cooking processes before they are released into the environment. It draws fumes from the kitchen through the hoods. These fumes will be scrubbed by high pressure water jets due to which all the contaminants such as oil, grease etc. are trapped and cleaned air will be exhausted to the environment. The Kitchen Scrubbers manufactured by Aero-tech Industries are highly efficient and have low pressure.ADVANTAGES
- 1.Relatively small space requirements
- 2.Can collect gases as well as particulates
- 3.Can handle high-temperature, high-humidity gas streams
- 4.Capital cost low and after the particulate matter is collected, it cannot escape from hoppers or during transport.
- 5.High collection efficiencies on fine particulates
- 6.Handle gas streams containing flammable or explosive materials.
- 7.Wet scrubbers can neutralize corrosive gases.
Air Washer works on the principle of adiabatic humidification which means the outside air is passed over the water-saturated cellulose paper pads, where water gets evaporated by removing the heat from hot air, thus equals to the latent heat of vaporisation and the air cooled down. Cooling effect produced is function of wet-bulb temperature. Lower the wet-bulb temperature higher will be the cooling effect and vice-versa. This means that Air Washer works more effectively in low humidity regions. Since it produces cooling effect due to evaporation of air, so air washer is also known as Evaporative Cooling Machine.
Water and fire proof 100% Micro Fibre Glass paper in pleated from tapered aluminium safe edge separators design that provides significant advantage controlled media spacing for virtually no turbulence low friction, uniform velocity, uniform dust holding, optimum filter performance.
Ducts are conduits or passages used in heating, ventilation, and air conditioning to deliver and remove air. The needed airflows include, for example, supply air, return air, and exhaust air. Ducts commonly also deliver ventilation air as part of the supply air. We fabricate ducts from Galvanize, Mild Steel, Stainless Steel Quality Sheet, Flance joint type which is supported by iron angle and rod.
Self Exhaust Counter
We all are very fond of looking at the food cooked especially for us at a live cooking section, but have you ever thought about the importance of maintaining the right ventilation for the smoke produced in a live kitchen counter?
Commercial live kitchen ventilation is a major component of a food establishment function because it affects not only the surrounding environment and customers but also the chefs who are cooking food for the customers.
We are specialized in designing and manufacturing a self-exhaust ventilation system which draws the smoke produced during live cooking. It doesn’t require any wall fitting. The entire counter with cooking equipment and ventilation system is mobile and can be used anywhere for live cooking.
These are most suitable for live cooking at any food establishment with open seating and places where there is no provision of having an exhaust fitted into the wall or ceiling.
Fresh Air Grill
The frame and blades of our fresh air grills are of high-quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Our superior quality air grills have following features:
- Optimum functioning
- Superior strength
- Robust construction
- Prime quality
- Tough body